CARX composite exhaust valve

source：Xiamen, rhett fluid control co., LTD The information has been viewed： 5314 Time：2013-07-03 20:36:57


CARX composite exhaust valve for the highest point of the piping or where breath, excluding the gas pipe to clear the pipe, to work properly
Product overview
CCARX composite exhaust valve is a cylinder, valve parts, including stainless steel floating ball lever and valve. This valve is installed in the pump outlet or water distribution pipelines, to be used to remove the accumulation in the pipe in the air, in order to improve the efficiency of pipeline and pump, when the tube once produces negative pressure, the valve quickly inhaled air, in order to prevent shut inside damage due to load pressure. When the water began to pipe, the valve is in the open position, for a lot of exhaust, when the air is exhausted, the valve is filled with water, float up and drive the valve closed, to stop the exhaust pipe water, when the normal transportation, such as a small amount of air gathered to a considerable extent on the valve, the valve water level fall, the air from the hole. When the pump stops, the water flow in the pipe empty or when the negative pressure tube, the plug is opened quickly, inhaled air. To ensure pipeline safety
Technical information:
Medium: water
Temperature: 0-80 ℃
Pressure rating: 1 ~ 1.6MPa
Nominal size: DN25-200
Body: Cast Iron
Ball and plug: stainless steel
Sealing material: NBR rubber
The floating ball, seal test pressure: 0.05-1.1MPa no water leakage