Cage single-seat regulating valve

source：Xiamen, rhett fluid control co., LTD The information has been viewed： 5753 Time：2013-07-03 20:42:59


Product overview
Cage type single-seat regulating valve is a pressure balance valve, the cage-type sleeve guide, single-seat sealing structure, equipped with multi-spring actuator or electric actuator, flow channel was streamlined S, imported seal ring. Overall with stable, allowing a large pressure difference, flow characteristics of precision low noise characteristics. Particularly applicable to strict requirements, leakage around the valve pressure greater workplace.
This series of products are the normal temperature, high temperature, low temperature, regulating and cutting type, bellows seal type and other types of. Product nominal pressure level of a PN1.6, 4, 6.4, 10; body diameter range of DN20-DN300; a variety of grades suitable fluid temperature of -150 ℃ -+560 ℃ range; leakage level is divided into grade IV, V, VI; linear, equal percentage flow characteristics. Available in various sizes.
This series of regulating valve adopts a modular design, with different combinations, with a variety of accessories. "
Main technical parameters
Body part
● body forms: direct casting ball valve
The valve body material: carbon steel, stainless steel
● nominal diameter: DN20-DN300
● nominal pressure: 4 PN1.6 6.4 10.0MPa 2.5
ANSI 150300 600LB
JIS 10K 20K 30K 40K
● connection: flange: FF RF RTJ
Thread: (suitable for 1 "below)
Welding: SW BW
● structure length: IEC534
● the valve cover types: normal temperature type
High temperature type
Bellows seal type
Low temperature type
● fill material: Teflon flexible graphite
● sealing gasket: metal clip graphite gasket PTFE pad
Valve parts
● spool type: single-seat cage
●: linear equal percentage flow characteristics
● inside material: 1Cr18Ni9Ti 1Cr18Ni9Ti+PTFE
Actuator
● pneumatic: single spring type actuator spring type actuator
Mode of action: gas - Open - closed
● electric